- This topic has 2 replies, 3 voices, and was last updated 18 years, 1 month ago by
.
-
Posts
-
Hi!! can someone please help me. i have this fridge freezer where the filter light stays red on the water dispenser and no water is released… i have replaced the external filter but same problem. how can i ”reset” the electronics or are there any other ideas please?
in addition to this the common design fault with the fridge back panelhas occured and therefore i need to order themodified panel (just to let you know incase this could be causing the water problem)
❓ ❓ ❓
Re: SAMSUNG FRIDGE FREEZER
Hi
If the evaperator panel has failed then yes this can cause the water tank to freeze thus no water.
Bryan
Re: SAMSUNG FRIDGE FREEZER
A model helps but if you are not getting any water then remove back panel in fridge side and check to see if the evap is frozen up along with the cover its self.
1. Check that the thermal fuse and sensor are ok.
2. Check both heaters drain and evap unconnect the heaters as they are linked together or you will get a false reading.
3. Defrost drain hole
4. Fit modified evap cover with clip that go’s onto heater direct.
5. By this time the water container should have defrosted enough to allow water through.😀
- You must be logged in to reply to this topic.