Strange code on AEG Favorit 64810

Home › Forums › Public Support Forums › International Forums › European Appliance Forum › Strange code on AEG Favorit 64810

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 12, 2008 at 5:12 pm #35239
    altaaa
    Participant

    My dishwasher won’t do any programs. It started after the water company had a “blackout” and the pressure dropped on the water.

    Now it has the following code, which I can’t find anywhere on the net or in the manual. I’m not exactly sure what it says, so I made a picture 😀

    It just gives this code, no matter which button I press.

    I checked this manual: http://www.serviceforce.co.uk/pdfs/U04007.pdf . It’s for a 64800 while I have a 64810, but it was the closest I could find.

    Can anybody shed some light on this?

    March 12, 2008 at 7:53 pm #245658
    Penguin45
    Participant

    Re: Strange code on AEG Favorit 64810

    Try pressing and holding the button next to the display for a count of 5, let go and then switch off. Leave it for a minute or two and then try again. May clear it – if it doesn’t, you have some sort of corruption issue with the PCB.

    Penguin45.

    March 12, 2008 at 8:05 pm #245659
    altaaa
    Participant

    Re: Strange code on AEG Favorit 64810

    I have found the issue. It appears to be a “child blocking mode”. The characters represent “BLO”, which stands for “Block”. I resolved the issue by pressing simultaneously the Pre-wash and Quick buttons for about 3 seconds.

    I had to find this somewhere on the dutch AEG website, as it doesn’t appear to be in the manual…

    Anyway,

    Thanks for your reaction!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.