MFI Fridge Freezer APM 6528

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › MFI Fridge Freezer APM 6528

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 13, 2008 at 5:44 pm #35266
    delahart
    Participant

    Built in fridge freezer APM6528 No. 8551 107 15005 Puts up fault code and beeps (as they do, just to annoy customers who like to pass it on!!), and the
    6 and 7 neons flash. Anyone have the fault code diagnosis for this? Seems to cool OK initially. but then fault develops.

    March 14, 2008 at 7:11 am #245758
    expertcat
    Participant

    Its telling you from them fault diagnosis that there is a system fault.

    I quote

    Acoustic alarm BL2,TL6 & TL7 flashiong.

    The alarm is activated if after compressor start up the evaporater sensor does not detect a temp decrease rom 4.5 to 0c within the set up time.
    This time varies depending on the external sensor temp.
    TL3 & TL7 Refrigerator sensor faulty
    TL4 & TL7 Evaporater Sensor faulty
    TL5 & TL7 External sensor faulty

    Like you say seems to be cooling ok

    Personel view that most likley the evaporater sensor has lost it tolerance but ot enough to show the fault.

    You could try checking the system which I have done in the past to find system running to spec.

    Good old whirlpool to seal these sensors in so looks like a scrapper.

    Hopes this helps

    March 14, 2008 at 2:48 pm #245759
    delahart
    Participant

    Re: MFI Fridge Freezer APM 6528

    Thanks for that will go and recheck and advise customer.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.