- This topic has 2 replies, 2 voices, and was last updated 18 years ago by
.
-
Posts
-
😀 Hi can anyone help on this one that i am having fun with indesit WIE167 1600 WITH DISPLAY
Went there 3 weeks ago machine filling emptying at the same time, so changed main pcb
Emw px, all well!. Worked, fixed, week later lady phones back every now and then 4/5 washes works fine, then
Flashes up f11. F11= pump ,
Machine fills up washes OK heats up OK , then empty’s wash water, none in drum then gets into this f11 state, KEEPS PUMPING OUT /STUCK ON
f11 she resets wash of it goes?????
I have checked sump hose/pump/drain hose/pressure bottle / all clean, like new. Machine is plumbed in to stand pipe empty’s fine in time. Last week i changed the pump, but still f11
Never dose this when i am there, but that’s life?, 😡 is it pcb again. Pressure switch. ❓
Thanks FOR ANY HELP ON THIScanufixit, ( well not at this moment )
Re: indesit WIE167
Hi, the F11 fault is for pump not activating, rather than F05 which is not actually emptying,
F11 means that the module cannot detect the resistance of the pump, or that the module is unable to switch it, either way if all the wiring/plugs are ok, and you’ve already changed the pump, then yes, afraid it looks like another module faultRe: indesit WIE167
thanks for that hotpnt , 😀 went back today,pinched up all plugs to pcb, extra pinch for pump plug in, seems odd that it emptys the water out totally ?
(module cannot detect the resistance of the pump, or that the module is unable to switch it on ) !but puts it on / (emptys ) ❓well time shall tell, if i get a recall i will change module
again thanks 😀
canufixit
- You must be logged in to reply to this topic.