zanussi fs1255s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › zanussi fs1255s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 2, 2008 at 5:32 pm #35709
    robbo1973
    Participant

    914791104. this machine as soon as you turn dial from off to any programme the end light flashes and nothing else i followed the f/c book and put it on diagnostics and all the lights flashed then all the vertical ones came on and that was it no door lock.any tips

    April 3, 2008 at 1:06 am #247705
    aqualectric
    Participant

    Re: zanussi fs1255s

    If you select a program, press start and the door doesn’t lock, first substitute the interlock. If it still doesn’t lock or the ‘End’ lamp flashes, suspect PCB.

    HTH,

    Steve.

    April 3, 2008 at 3:49 pm #247706
    robbo1973
    Participant

    Re: zanussi fs1255s

    hi steve thanks for reply. as soon as you move dial from stop position end flashes press start and nout happens.pcb? as i have changed i/locks before but for not starting. does end always flash ?

    April 3, 2008 at 3:57 pm #247707
    Martin
    Participant

    Re: zanussi fs1255s

    aqualectric wrote:first substitute the interlock.

    Have you done as Steve suggests and changed the Interlock? The point here being that once the door locks the programme self-checks for errors, then shows as an error, if you catch my drift? 😉

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.