Neff Hinge replacement U1661

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Neff Hinge replacement U1661

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 3, 2008 at 12:38 pm #35729
    drodgers
    Participant

    Hi,
    I’ve got my hinges from UK Whitegoods who provided a fantastically quick service from identifying parts to shipping. Problem I’ve got now is how to remove the hinges from my NEFF 1661 (main oven), I can get the door out, however it looks like the glass needs removing, but it covers the whole inside of the door with no obvious method of removing. Anyone replaced hinges on this model? thanks David

    April 3, 2008 at 7:11 pm #247789
    Penguin45
    Participant

    Re: Neff Hinge replacement U1661

    Two screws through the door for the handle and a couple along the bottom edge should let the halves separate, from memory.

    Penguiin45.

    April 3, 2008 at 7:21 pm #247790
    gegsy
    Participant

    Re: Neff Hinge replacement U1661

    Penguin45 wrote:Two screws through the door for the handle and a couple along the bottom edge should let the halves separate, from memory….

    Good memory :tup:

    Greg

    April 4, 2008 at 9:06 am #247791
    drodgers
    Participant

    Re: Neff Hinge replacement U1661

    Thanks for that, I found the 2 screws at the bottom and accept that the handle needs to come off, the screws I can see that hold the handle on are behind the glass which covers the entire inside of the door.

    April 4, 2008 at 12:06 pm #247792
    superfix
    Participant

    Re: Neff Hinge replacement U1661

    It may have the triple glazed door, without the full E-Nr can’t say for sure.

    If it has then the inner glass panel will pull away if you grab it at the bottom edge and lift.

    Check the instruction book it will have a section on removing and cleaning the door.

    April 4, 2008 at 1:35 pm #247793
    drodgers
    Participant

    Re: Neff Hinge replacement U1661

    Excellent, grabbed the bottom of the glass and pulled, it comes off. Did try the small oven first as I thought it would be cheaper to replace when it broke into a thousand pieces. Thanks for all your help. David

    April 4, 2008 at 10:05 pm #247794
    superfix
    Participant

    Re: Neff Hinge replacement U1661

    drodgers wrote:Excellent, grabbed the bottom of the glass and pulled, it comes off. Did try the small oven first as I thought it would be cheaper to replace when it broke into a thousand pieces. Thanks for all your help. David

    :tup:

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.