Where there’s a WIL there’s no way!

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Where there’s a WIL there’s no way!

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • #35734
    Martin
    Participant

    Indesit WIL153UK….22 months of age before it died (is this a record I wonder?) 8)

    Symptoms of the patient = “Set on a 30 degree wash, and hour later came into the utility room to find it red hot, steam pouring out of the soap drawer the front of which had melted and fallen off!”

    I get there and sure enough the front of the dispenser had melted a bit 😈

    I switched it on and it was like it was on speed, crack and downers all at the same time. 🙁 It was spinning, filling, pumping and every single LED was flashing like an October tramride between Blackpool and Cleveleys and all in perfect harmony!

    I’ve done all the usual tests (like ya do) I even tried dealing a pack of Tarot Cards on its worktop whilst it was having a fit in the hope of inspiration? (I couldn’t get Mystic Meg on the phone at the time :() The tealeaves left in my cuppa also led me nowhere?


    Please can you advise what the problem might be, where does my customer go from here? 😈

    #247817
    admin
    Keymaster

    Re: Where there’s a WIL there’s no way!

    TO THE TIP WITH IT ! 💡

    canufixit

    #247818
    iadom
    Moderator

    Re: Where there’s a WIL there’s no way!

    22 months, thats ancient for one of these beasts, one a few weeks ago, 14 months old, sock jammed behind inner drum, sealed drum job, customer wasn’t interested in the manufacturers maximum repair charges as she was so disgusted by the thought of having to have a complete drum change on a ‘new’ machine. 😥

    Jim.

    #247819
    M1
    Participant

    Re: Where there’s a WIL there’s no way!

    You need to sprinkle some magic dust on Indesit machines and wave your majic wand !!


    My majic wand is a 4 pound lump hammer !!

    Scraped four Indesit M/C last week !! all under 2 years old !!

    #247820
    Madmac
    Participant

    Re: Where there’s a WIL there’s no way!

    Yep, meet at least 2 or 3 merloni products BER each & every week. I personally write down every badge name that on a card that i think should be avoided by my cust when she/he shops for a replacement.

    Trouble is, the list is bloody HUGE.. :rolls:

    #247821
    Penguin45
    Participant

    Re: Where there’s a WIL there’s no way!

    You could always give them a “Buy” card with ISE on it 😀 .

    Chris.

    #247822
    macmini
    Participant

    Re: Where there’s a WIL there’s no way!

    Madmac wrote:Yep, meet at least 2 or 3 merloni products BER each & every week. I personally write down every badge name that on a card that i think should be avoided by my cust when she/he shops for a replacement.

    Trouble is, the list is bloody HUGE.. :rolls:

    Out of interest, what’s excluded?

    #247823
    Penguin45
    Participant

    Re: Where there’s a WIL there’s no way!

    Come on….. you of all people know where this one’s going to go! 😆

    Chris.

    #247824
    Madmac
    Participant

    Re: Where there’s a WIL there’s no way!

    Penguin45 wrote:You could always give them a “Buy” card with ISE on it 😀 .

    Chris.

    Well if the customer gives the impression they’re gonna be looking at high end Bosch or Miele, then i certainly do always mention ISE as an alternative Chris. As i dont sell machines i just tell them to have a peek at UKW and see what they think. 😉

    #247825
    gegsy
    Participant

    Re: Where there’s a WIL there’s no way!

    M1 wrote:You need to sprinkle some magic dust on Indesit machines

    Yea thermite, light fuse and get a nice wine put to quaff 😀

    Greg

    #247826
    Madmac
    Participant

    Re: Where there’s a WIL there’s no way!

    macmini wrote:

    Madmac wrote:
    Yep, meet at least 2 or 3 merloni products BER each & every week. I personally write down every badge name that on a card that i think should be avoided by my cust when she/he shops for a replacement.

    Trouble is, the list is bloody HUGE.. :rolls:

    Out of interest, what’s excluded?


    Do you REALLY think i can tell you THAT!! Next thing you know you have some concrete boots & and an unplanned fishing trip to contend with.. Not that i’m stereotyping Italians… err, not that they are Italians.. god, i’ve said too much.. 😯

    #247827
    roly16
    Participant

    Re: Where there’s a WIL there’s no way!

    canufixit wrote:TO THE TIP WITH IT ! 💡

    canufixit

    Tip? Your tip is a registered WEEE acceptance site is it? 😯

    #247828
    hotpnt
    Participant

    Re: Where there’s a WIL there’s no way!

    whats all this panic about?? 😆 all you need is, a console panel, drawer, drawer front, possibly a dispenser assy, then a module, eeprom & thermistor, easily fixable, only 30 mins work, easy job, dont scrap it, it will easily go on for at least another 6 weeks with all those parts, and its far too big to fit into a ‘blue box’ kerb side recycling box anyway 😆

    #247829
    admin
    Keymaster

    Re: Where there’s a WIL there’s no way!

    roly16 wrote:

    canufixit wrote:
    TO THE TIP WITH IT ! 💡

    canufixit

    Tip? Your tip is a registered WEEE acceptance site is it? 😯

    yes weee are 😉 , and there are lots of its family,that are there also, so it will not be lonely 😆

    #247830
    roly16
    Participant

    Re: Where there’s a WIL there’s no way!

    canufixit wrote:

    roly16 wrote:
    TO THE TIP WITH IT ! 💡

    canufixit

    Tip? Your tip is a registered WEEE acceptance site is it? 😯

    yes weee are 😉 , and there are lots of its family,that are there also, so it will not be lonely 😆

    I’m sure it won’t 😀

Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.