NEFF D/W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › NEFF D/W

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 4, 2008 at 9:16 am #35750
    kevinlewis
    Participant

    ENR:S5409X0GB/01
    FD:8504
    ANY HELP PLEASE!
    MACHINE TAKING FOUR HOURS TO COMPLETE CYCLE.
    SHOWS ONE MIN IN DISPLAY BUT JUST CARRIES ON.
    ALSO TEMP DOESNT SEEM TO GET WARM ENOUGH.
    LENGTH OF WASH DUE TO NO GETTING TO TEMP?
    ‘OPTO SENSOR’ IN DOOR WHAT DOES IT ACTUALLY DO?!
    THANKS

    April 4, 2008 at 9:32 am #247915
    Martin
    Participant

    Re: NEFF D/W

    kevinlewis wrote:ALSO TEMP DOESNT SEEM TO GET WARM ENOUGH.
    LENGTH OF WASH DUE TO NO GETTING TO TEMP?

    Heater faulty? Water level problem? etc

    kevinlewis wrote:‘OPTO SENSOR’ IN DOOR WHAT DOES IT ACTUALLY DO?!

    Water hardness sensor 😉

    April 10, 2008 at 9:05 am #247916
    kevinlewis
    Participant

    Re: NEFF D/W

    THANKS FOR THE REPLY.HEATER TESTING OK SO PRESUMED ONE OF THE SENSORS.HAVE NOT PERSONALLY BEEN TO THE MACHINE YET AS ANOTHER OF OUR GUYS WAS COVERING IT
    ANY IDEAS ON WHAT THE SENSOR READINGS SHOULD BE? ARE THEY STILL LOCATED AT THE FRONT WHEN THE BOTTOM FRONT
    PANNEL IS REMOVED?
    THANKS AGAIN

    April 10, 2008 at 2:25 pm #247917
    Dansta
    Participant

    Re: NEFF D/W

    Has the pressure chamber on the LHS been checked and also the metering hose connected to it because they can “gunge-up” and cause this problem.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.