Dyson hoover DC02 cutting out (ten years old)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Dyson hoover DC02 cutting out (ten years old)

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 5, 2008 at 2:01 pm #35773
    boselecta
    Participant

    Never worked on hoovers before but my missis Dyson DC02 motor burnt out, (brushes burnt through armature). I replaced the motor but now unless she has the cable all the way out it cuts out and have to wait for few min until it comes back on. Have checked the motor and is fitted ok, and sucktion is good. (there is a foam cover on the motor wondering if i should just throw that out?
    I am guessing thermal cut out somewhere, any ideas guys?

    April 5, 2008 at 3:20 pm #248037
    Phidom
    Participant

    Re: Dyson hoover DC02 cutting out (ten years old)

    They do have a motor TOC. Usually if the motor gets that hot you will notice the outer plastic casing of the machine feels hot. If the machine still feels cool perhaps you have a faulty TOC on the new motor. If you still have the old motor you could try the TOC off that.

    April 5, 2008 at 5:30 pm #248038
    spanner51
    Participant

    Re: Dyson hoover DC02 cutting out (ten years old)

    the TOC is available as a seperate part, p/n 00392-01

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.