- This topic has 4 replies, 4 voices, and was last updated 18 years ago by
.
-
Posts
-
Got an ongoing problem with a Bosch wfb2000
Symptoms are: Towards end of cycle prewashh light flashes, machine waits for 5 minutes then clicks through to end without having pumped out.
Choose spin or drain and machine completes ok.
Have fitted new pump 8 weeks ago for same problem, checked carbon brushes etc.
Any ideas or experience with this fault?
Neil
Re: Bosch wfb2000 no mt problem
I had one like that, it was a 5p floating around in the tub, went a couple of times everytime would work when you pump and spin only, checked hoses and pump could not fault it and even changed pump again then found this illusive 5p in the end.
Steven
Re: Bosch wfb2000 no mt problem
Pretty much associated with a pump outlet blockage or pressure switch problem I would think? The little pump outlet bleed pipe that goes to the dispenser worth a clean out as well as that drain outlet elbox unit and hose between that and the pump I reckon. 😉
Re: Bosch wfb2000 no mt problem
I assume you have a WFF2000 Not a WFB2000. WFB is a very basic appliance with no fault indicators. Have you checked the drain spiggot under the sink to see if a button or 5p is acting like a butterfly valve?
- You must be logged in to reply to this topic.