siemens d/w se64a630gb/46

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens d/w se64a630gb/46

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 8, 2008 at 5:08 pm #35869
    LittleMan
    Participant

    Hi can anyone tell me why this machine will not heat and advance
    Thanks Les

    April 8, 2008 at 6:38 pm #248455
    gegsy
    Participant

    Re: siemans d/w se64a630gb/46

    Hi
    What have you checked?

    Greg

    April 8, 2008 at 7:03 pm #248456
    LittleMan
    Participant

    Re: siemens d/w se64a630gb/46

    Hi
    Greg
    Have tested heater and stats
    Les

    April 8, 2008 at 7:28 pm #248457
    gegsy
    Participant

    Re: siemens d/w se64a630gb/46

    Hi
    Ok, whats the water level and recirculation force like to both spray arms?
    Is the safety microswitch on the heater activating when recirc pump driving?
    If above are ok I would personally be looking at module fault and rarely NTC out of tolerance 😉

    Greg

    April 9, 2008 at 7:01 am #248458
    LittleMan
    Participant

    Re: siemens d/w se64a630gb/46

    Hi
    Pressure ok
    Have not tested the heater microswitchis it on the heater
    Les

    April 9, 2008 at 7:25 am #248459
    gegsy
    Participant

    Re: siemens d/w se64a630gb/46

    Hi
    Yes its in between the heater terminals 😉

    Greg

    April 9, 2008 at 1:19 pm #248460
    LittleMan
    Participant

    Re: siemens d/w se64a630gb/46

    Hi Greg
    Thanks for your help found fault on main module it was a dry joint repaired tested all working ok
    Thanks again Les

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.