Whirlpool akz161

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool akz161

  • This topic has 3 replies, 2 voices, and was last updated 18 years ago by MDE.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 9, 2008 at 11:55 am #35889
    MDE
    Participant

    Hi all I had look at this cooker today and main oven will not come on ,display shows STOP and will not change had a look at main PCB and all looks ok . Any help would be appreciated .


    Thank Mark

    April 9, 2008 at 12:09 pm #248526
    DentedPorsche
    Participant

    Re: Whirlpool akz161

    Hiya,
    Put the cooker controls to the off position. Turn the power on at the wall, press the button 3 times to get to the set time position. Set the time. Press the button again.
    Hope my memory is good, think that’s the procedure.

    Brian

    April 10, 2008 at 1:55 pm #248527
    MDE
    Participant

    Thanks for your reply Brian,went back out to the cooker . Reset made no difference ,I did notice that there was no feeling of a click when I pushed the button should there be.

    Thanks Mark.

    April 10, 2008 at 5:05 pm #248528
    DentedPorsche
    Participant

    Re: Whirlpool akz161

    Hiya,
    Yep, there should be a definite click when you press the button.

    Brian

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.