Beko 1715s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko 1715s

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 11, 2008 at 6:23 am #35937
    atech
    Participant

    I’m working in a Beko 1715s. The conditioner light is flashing and I can’t get the machine to do anything. I think it’s a main board problem. Has anyone else had this problem? If so what was the fix?

    April 12, 2008 at 9:44 am #248786
    timdowning
    Participant

    Re: Beko 1715s

    I found this reset procedure;

    Turn power button off (not at wall)
    Select 90 degree wash
    Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
    Leave power on.
    Select any Spin position.
    Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
    Machine should be re-set ready for use.

    also check carbon brushes are ok.

    April 12, 2008 at 4:33 pm #248787
    robbra
    Participant

    Re: Beko 1715s

    had this same fault this week. Did the reset and worked for one wash then same fault. heater was o/c
    Rob

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.