diplomat apl 3201 lx

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › diplomat apl 3201 lx

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 11, 2008 at 7:48 pm #35948
    firestarter1977
    Participant

    hi all

    first post here !

    i hope someone can help me with this one.

    i have a diplomat apl 3201 lx ( or 1x not sure which exactly )

    the oven fan comes on but wont generate heat , the grill is fine.

    last night the oven was on then i noticed the element behind the fan was glowing ( could see through the window above the fan ) now tonight it wont heat up at all.

    could this be the element ? if it is should i strip it and measure the element before buying a new one??

    any help will be greatly appreciated

    regards mark

    April 11, 2008 at 8:22 pm #248820
    kwatt
    Keymaster

    Re: diplomat apl 3201 lx

    Hi Mark,

    It will almost certainly be the element that’s goosed and it’s this one that’s fitted.

    So long as the fan is okay that should be all you need.

    HTH

    K.

    April 11, 2008 at 9:29 pm #248821
    firestarter1977
    Participant

    Re: diplomat apl 3201 lx

    cheers mate

    will strip it and check the fan bearings, if they ok will get one on order tomorrow

    thanks for the help fella


    regards mark

    April 12, 2008 at 11:22 am #248822
    firestarter1977
    Participant

    Re: diplomat apl 3201 lx

    hi all

    i took the cover off this morn and found the element had blown badly !

    had a measure and the width is as the one in the link ( 180 ) but the length is 200 and the one shown in the link is 220mm

    will this still fit ok ??


    regards mark

    April 12, 2008 at 11:36 am #248823
    kwatt
    Keymaster

    Yes it will Mark, sometimes a bit of adjustment is needed with fitting a fan element but we fit those pretty regularly with no problems.

    HTH

    K.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.