Hygena AYH8101/2

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hygena AYH8101/2

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 12, 2008 at 11:07 am #35957
    krunchy
    Participant

    I have a Hygena Dishwasher AYH8101/2 and it has developed a problem where the lower spray arm detaches from the spray feed pipe connection when in use. Is this a common problem? Any advise appreciated.

    Cheers KF.

    April 12, 2008 at 11:47 am #248854
    kwatt
    Keymaster

    Re: Hygena AYH8101/2

    Hi KF,

    This part is the likely culprit.

    HTH

    K.

    April 12, 2008 at 1:11 pm #248855
    krunchy
    Participant

    Re: Hygena AYH8101/2

    kwatt wrote:Hi KF,

    This part is the likely culprit.

    HTH

    K.

    Hi K, Thanks for the quick response.

    Looking at the diagram it would appear that the item No 320 is the problem as I don’t appear to have one of these. I’ve no idea what might have happened to it but does it come with Item 315 or is it a separately available part and if so can you send me the purchase info/link for this as well?

    Many thanks again,

    KF.

    Than

    April 12, 2008 at 1:17 pm #248856
    kwatt
    Keymaster

    Hi KF,

    It’s a “milled bush”, don’t ask me, it’s French. 😕

    Basically a spacer/washer and it is included in the hub kit from that link. 😉

    HTH

    K.

    April 12, 2008 at 1:57 pm #248857
    karv
    Participant

    Re: Hygena AYH8101/2

    my memory is faded on these been long time but also check the spray arm that the litte ridge are not worn out, so when u push it on it grips

    April 13, 2008 at 9:02 am #248858
    krunchy
    Participant

    Re: Hygena AYH8101/2

    Guys, Thanks for all your help and advice.

    I took a close look at the spray arm yesterday and found a small item partly blocking one of the spray holes. I removed this and tried the machine again and the arm stayed in place.

    I’ll try again tonight and see if it works again, I’ll post the results again here.

    Cheers again,

    KF

    April 14, 2008 at 12:34 pm #248859
    krunchy
    Participant

    Re: Hygena AYH8101/2

    Tried again and it worked just fine. Looks like a small partial blockage can cause this problem.

    Cheers,

    KF..

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.