whirlpool washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool washing machine

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • April 20, 2008 at 10:23 am #36159
    dna
    Participant

    hi have a whirpool washing machine AWG349/3-1200 door lock was faulty. Replaced door lock. Now door locks but machine does not start. I think pcb but there are 2 and they are both very expensive. any help would be great.

    April 20, 2008 at 11:35 am #249807
    Phidom
    Participant

    Re: whirlpool washing machine

    Usually if an interlock goes short circuit it will blow copper strips on the board so you can see visible damage on the back of the PCB. Have you checked for this?

    April 20, 2008 at 11:57 am #249808
    Penguin45
    Participant

    Re: whirlpool washing machine

    SMEG in a dress – lock joins power board (front one) on J10.

    Chris.

    April 20, 2008 at 3:41 pm #249809
    dna
    Participant

    Re: whirlpool washing machine

    Yes i have checked both pcb’s no damage to both no bloen tracks.

    April 20, 2008 at 4:53 pm #249810
    Martin114
    Participant

    Re: whirlpool washing machine

    motor brushes?

    April 20, 2008 at 5:08 pm #249811
    dna
    Participant

    Re: whirlpool washing machine

    Machine does nothing will motor brushes do this??

    April 20, 2008 at 6:09 pm #249812
    iadom
    Moderator

    Re: whirlpool washing machine

    Quite possible.

    April 20, 2008 at 8:51 pm #249813
    Grendal
    Participant

    Re: whirlpool washing machine

    I had exactly the same fault on this model and it was the brushes.

    the machine does a self test at the begining of the cycle and tests the motor first hth

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.