Kenwood D/w kdw243a

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Kenwood D/w kdw243a

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 24, 2008 at 8:53 am #36251
    Steven
    Participant

    Condensation / leak problems on chinese style dishwashers.

    Has any one come across this problem with these dishwashers.

    The top corner of goal post door seal on these models seem to concave creating a small gap allowing steam and water to pass.

    Has anyone found a cure to prevent this, i have tried refitting and replacing seals but still find that the seal dips on one top corner?

    Steven

    April 24, 2008 at 5:24 pm #250211
    smartin
    Participant

    Re: Kenwood D/w kdw243a

    chances are it will be a door hinge bar bent due to weight of decor door, easiest way to tell is open door let it come to rest if its pointing down towards the floor then thats what you will need , under 4 quid from connect
    smartin

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.