Zanussi zwf1111w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi zwf1111w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 30, 2008 at 3:13 pm #36412
    franz
    Participant

    Anybody got any ideas about this machine – Set prog – push start button –
    door locks and prog starts -i.e pump runs – but only for about 4 secs then m/c stops and does nothing – checked brushes – loose wires etc

    Franz

    April 30, 2008 at 11:20 pm #250899
    aqualectric
    Participant

    Re: Zanussi zwf1111w

    Inlet valve O/C ? Or no power to the valve?
    Does the “End” lamp flash as well? If so, suspect PCB.

    HTH,

    Steve.

    May 1, 2008 at 7:17 am #250900
    franz
    Participant

    Re: Zanussi zwf1111w

    Thanks Steve , but valves are o.k. and I dont get any flashing lights at all .
    ps anybody got a part number for the PCB as Connect list a part number that comes back as unknown when you try to order it.

    Franz

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.