- This topic has 5 replies, 4 voices, and was last updated 17 years, 11 months ago by
.
-
Posts
-
Need some info for the new 5.
Spin speeds mainly – the full spin is not available on synthetics, delicates and wool. I have a customer who insists on knowing what she can expect.
Can the spin speed be altered after the programme starts? If it’s turned down for wool (say 800), can you turn it up for a cotton wash after the button is pushed?
One purely practical point is removing the soap drawer – push the blue bit… You need a digit like a steel rod to depress the push point until it pops!
Chris.
Re: Info
I think you’ll find it logs the setting info before you press the start button. Obviously it has default spin speeds for each fabric type but it will let you spin slower than the default speed.
Best advice is to tell the customers to leave spin speed selector set at maximum, select the correct program for the fabric being washed and it will automatically select the optimum/safest spin speed.
Not too sure about the steel digit thing, not enough feedback yet to come to any conclusions. If it becomes an issue we will sort out a solution.
Sean
Re: Info
I have to agree with Chris regarding the soap drawer, not installed an ISE 5 Mk 2 yet but the same drawer in the ISE 2 does require considerable force to depress the release catch.
Jim.
Re: Info
I have to admit, that the dimple on top of the blue cover could have done with being set half an inch further forwards (towards the front)for ease of depressing it with ones digit but once you press down on the dimple it doesnt take excessive force IMHO.
I’ll ask John to mention it to the guys at Vestel, and see if they can make it wuss proof 😆 .
Sean
Re: Info
As I sell most of the 2’s to older couples or single old dears they are the type of people who would have difficulty with the Vestel drawer release.
jim.
Re: Info
Penguin45 wrote:Need some info for the new 5.
Spin speeds mainly – the full spin is not available on synthetics, delicates and wool. I have a customer who insists on knowing what she can expect.
Can the spin speed be altered after the programme starts? If it’s turned down for wool (say 800), can you turn it up for a cotton wash after the button is pushed?
Info emailed Chris.
The spin speeds shown, AIUI, are the maximum permissible on that particular program. If the knob is set to a higher spin speed it will drop back.
Soap drawer, we’ve asked… :rolls:
K.
- You must be logged in to reply to this topic.