Brandt Oven Door Problem

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Brandt Oven Door Problem

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 6, 2008 at 10:51 am #36527
    kals247
    Participant

    Hi,

    I am having problems with an integrated Brandt oven:

    Model: FLT24X1U1

    The oven door has come off, the hinges/clips dont seem to be broken but everytime I try and fit it back on, the clips dont seem to be catching properly and snap back into place, leaving the door detached again.

    Any advice welcomed.

    Thanks

    May 6, 2008 at 11:22 am #251372
    kwatt
    Keymaster

    Have you replaced the hinges and receivers?

    K.

    May 6, 2008 at 11:30 am #251373
    kwatt
    Keymaster

    Re: Brandt Oven Door Problem

    BTW, the hinges are HERE and the hinge receivers are HERE for the main oven door. The main oven is common, the upper one not so much.

    HTH

    K.

    May 6, 2008 at 12:38 pm #251374
    kals247
    Participant

    Re: Brandt Oven Door Problem

    Hi,

    Thanks for the quick reply.

    I havnt replaced the hinges or the recievers.

    Do you think its worthwhile replacing both? I think it might just be the recievers that are not catching the hinges correctly.

    Thanks for the links

    Thanks

    May 6, 2008 at 12:45 pm #251375
    kwatt
    Keymaster

    Personally, I’d always replace both and be done with it. It’s the only way to be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure the problem is solved.

    K.

    May 6, 2008 at 1:26 pm #251376
    kals247
    Participant

    Re: Brandt Oven Door Problem

    Ok, will do.

    I take it its pretty easy to replace both? are there any guides available?

    Thanks for the help.

    May 6, 2008 at 1:30 pm #251377
    kals247
    Participant

    Re: Brandt Oven Door Problem

    Actually, just found a guide on the links you posted earlier.

    Cheers

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.