Problem with New Zanussi Fridge-Freezer

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Problem with New Zanussi Fridge-Freezer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • May 13, 2008 at 10:09 pm #36713
    russia22
    Participant

    Hi. We just took delivery of a new Zanussi ZNB343W today. We let it sit for 6 hours to settle before turning on. After 2 hours, freezer is nice and cold but fridge seems to be room temp. Is there something wrong with the fridge?

    Also, I cannot see how the fridge is cooled, except for perhaps the back panel to cool it, which seems insufficient in my opinion. I thought maybe the freezer cooled the fridge via a vent, but I can find nothing.

    Any suggestions?

    Thanks.

    May 14, 2008 at 3:41 am #252037
    admin
    Keymaster

    Re: Problem with New Zanussi Fridge-Freezer

    Hi

    Your appliance is a frost free unit which means on this model the freezer will defrost itself.the fridge is a type known as a wet wall fridge which means that the evaperator is behind the plastic liner.this will have small droplets of ice forming on it when it is working and will defrost itself once it has reached temprature.

    The temprature setting should be about 3.5,It may take longer for the fridge to cool down as the refrigerant goes through the freezer first.

    You should find this morning that the fridge will be down to temprature.if not then yes you do have a problem that will require an engineer vist.

    Bryan

    May 14, 2008 at 3:55 pm #252038
    russia22
    Participant

    Re: Problem with New Zanussi Fridge-Freezer

    Thanks! It seems to be worknig fine this morning, but took quite a while to cool down.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.