Samsung Q1435 washer. Error TE

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Samsung Q1435 washer. Error TE

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • May 27, 2008 at 8:41 am #36974
    smwaverider
    Participant

    Sometimes completes the cycle but more frequently stops part way through with error code TE. Is this Samsung code for Thermister? What can I do to Check and possibly rectify the error and where is the part located on the Q1435?
    Thanks

    May 27, 2008 at 9:14 am #253012
    helo_75
    Participant

    9. THERMISTOR ERROR – Display shows tE .
    – This error occurs, when Thermistor circuit is abnormal or a voltage of 0.2v or below or, 4.5v and over is detected
    – This error can be cleared by power s/w off

    the wash thermistor appears to be faulty

    could be a broken wire of course

    plug out if investigating!!

    May 27, 2008 at 12:44 pm #253013
    smwaverider
    Participant

    Re: Samsung Q1435 washer. Error TE

    Thanks Helo-75, that’s very helpful. I will investigated to see if there is a lose wire or if it needs replacing.
    I have previously replaced the heater element successfully. Where is the
    thermistor usually located?

    May 27, 2008 at 2:15 pm #253014
    helo_75
    Participant

    the thermistor is the probe that fits in/around the heater area
    ive looked on my samsung manual, and its not listed, but i can assure you its there

    May 27, 2008 at 6:28 pm #253015
    smwaverider
    Participant

    Re: Samsung Q1435 washer. Error TE

    Thanks,
    I’ll look tomorrow to check the connections etc. Have not read the email yet, but the answer to a spares enquiry to Whitegoods, says the thermistor cannot be bought sepearately but is part of something else £60+. My wife read the email so, until I read it, I,m sounding vague.
    Access to wife;s computer tomorrow

    May 27, 2008 at 7:00 pm #253016
    helo_75
    Participant

    its probabbly part of the heater then

    if no broken wires, replace and all will be cured

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.