- This topic has 6 replies, 2 voices, and was last updated 17 years, 10 months ago by
.
-
Posts
-
FD 7402 121542
Ordered the aqua hose (119923) for this old neff built in dishwasher.
When I attempted to fit the hose the inlet hose that goes on the air chamber at the side is alot smaller then the existing one.
I have contacted BSH about this and they assured me this is the correct hose.
Any ideas people?
check out this picture to see the problem: (the blue hose is the original)
http://img164.imageshack.us/my.php?image=pic2ik4.jpgRe: Neff Dishwasher S4132W0GB 14
Hi!
Yeah unfortunatly this is now the case, try sticking the hose in some boiling water first to get it more flexible.
Steve 🙂hi nationalhomecare
are you saying you have fitted the thin grey hose on to the air chamber?.
see the other picture i took to see the size difference
http://img501.imageshack.us/my.php?image=pic1fq5.jpgRe: Neff Dishwasher S4132W0GB 14
No, The grey hose replaces the blue one and the small clear one goes onto the air chamber.
HTH
Steve 🙂Re: Neff Dishwasher S4132W0GB 14
I’ll double check the respective numbers on my quickfinder now to see if its correct…………………….. 😕
SteveRe: Neff Dishwasher S4132W0GB 14
Yep, Part number is correct, the drawing is a bit scetchy but it shows the water hose (grey to replace blue) connected to the right and pressure hose (clear) connected to the left, You will also find the little corbin clip used on the old blue hose may not fit on the new grey one, strange but true!
Hope this helps
Steve 🙂
- You must be logged in to reply to this topic.