Servis M6513S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Servis M6513S

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 3, 2008 at 5:43 pm #37152
    johnnyhoz
    Participant

    Hi all,

    went to the above machine today, the customer said it aborted the progam part way through a wash cycle banged about then all the light started to flash.
    I started a wash program and while the motor is turning all the lights did indeed flash like disco but in no particular order. It continued the program draining spinning etc but would not cut out for me. The lights continued to flash but only whilst the motor was turning.
    Checked the carbons, both OK, no visual signs of burning on edge connectors etc. on the module, no earth faults on motor or heater.
    Has anyone had this before.

    Thanks John

    June 3, 2008 at 6:14 pm #253710
    Washman
    Participant

    Re: Servis M6513S

    Hi

    Had one today its the motor causing the fault , but you may find main module may need changing as well. Under guarrantee I always change both.

    Mike

    June 3, 2008 at 7:56 pm #253711
    johnnyhoz
    Participant

    Re: Servis M6513S

    Thanks Mike,
    unfortunately it’s not a guarantee repair so uneconomical
    as the motor is £145.82 + vat
    John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.