gw711 excellence Error 49

Home › Forums › Public Support Forums › International Forums › Australasian Appliance Forum › gw711 excellence Error 49

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 16, 2008 at 5:53 am #37405
    snakedaddy
    Participant

    Machine make continuous wereing sound on startup and displays Error 49..

    Could you please give me the discription of the error code, and possible fixes?

    thanks

    June 16, 2008 at 7:10 am #254784
    bigsmokepiker
    Moderator

    Re: gw711 excellence Error 49

    Error code 49 Indicates cold water inlet valve Fault

    June 16, 2008 at 12:06 pm #254785
    snakedaddy
    Participant

    Re: gw711 excellence Error 49

    thanks

    June 17, 2008 at 6:21 am #254786
    snakedaddy
    Participant

    Re: gw711 excellence Error 49

    After swaping over the inlet valve from hot to cold with no joy.. I opened up the circuit board to discover some burnt out tracks. Which I repaired and checked with a dmm..

    Now the machine turns on and comes up with error 9 so I was wondering what this was?

    Also when machine is powered off the last 3 lights are on does this indicate that the machine is in a error state or is there a error 7 on the machine aswell??

    /edit

    So error 9 is a size error so how do I go about setting the size for 7.5kg?

    June 17, 2008 at 7:03 am #254787
    bigsmokepiker
    Moderator

    Re: gw711 excellence Error 49

    Power of at console
    Press & Hold Temp up then power Button
    Press Spin speed Button up Spin Hold light is on for 7.5Kg
    Press Power to confirm setting

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.