diplomat integrated dw ADP8352

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › diplomat integrated dw ADP8352

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 17, 2008 at 11:32 am #37438
    wizard
    Participant

    First & second lights on during wash, machine constantly pumps out when filling, so never gets full enough to circulate. Any ideas other than pcb fault ? Thanks.

    June 17, 2008 at 6:32 pm #255127
    comptonappliances
    Participant

    Re: diplomat integrated dw ADP8352

    CAME ACROSS A ZANUSSI DOING THE SAME AND WAS PRESSURE SWITCH FAULT OR IF GOT FLOAT IN BASE COULD BE FLOOD PROTECTION OPERATED

    June 17, 2008 at 7:30 pm #255128
    Penguin45
    Participant

    Re: diplomat integrated dw ADP8352

    1st 2 flashing is E2 – no fill in time allowed. Stuck float ought to give flood code E5 (1st 3 flashing). I’d be thinking some sort of board fault.

    Chinese one, BTW.

    Chris.

    June 18, 2008 at 12:38 pm #255129
    wizard
    Participant

    Re: diplomat integrated dw ADP8352

    Thanks for replies, no water in base so not a flood alarm. I’m with Penguin on this, I think the pump relay is sticking on during fill. PCB now on order. Ta.

    January 29, 2010 at 6:10 pm #255130
    subs
    Participant

    Re: diplomat integrated dw ADP8352

    Ive got an identicle problem with one of these machines.
    Select any programme, machine starts by pumping out and then starts letting in water but continues to pump out at same time. First 2 led’s then flash.
    Base dry, float switch ok, pressure sytem seems ok, nothing obvious on board. Im thinking control board but was wondering how Wizard got on with this fault or as this original thread is quite old maybe this problem and cure is well known.

    Thanks

    Subs

    January 30, 2010 at 8:45 am #255131
    Jonah
    Participant

    Re: diplomat integrated dw ADP8352

    Hi subs, I’ve got a few PCB’s in stock left over from my old MFI days, email me if you need one at cost price 😀

    January 31, 2010 at 6:13 pm #255132
    expertcat
    Participant

    Had one the other month.

    Pcb was faulty

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.