- This topic has 3 replies, 2 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
Customer with Whirlpool AWM9100 with error code Fh did ask if this could be a 4 but she is sure it is lower case h.
Machine stops mid cycle so they unplug machine then switch back on and of it goes to complete cycle.
Sounds like obstruction acting like butterfly valve.
Before I go up a dead end glen albeit nice at this time of year any ideas most welcome.
thanks silverbroom
Re: Whirlpool AWM9100
No fill in time allowed – valves, wiring, flowmeter, level switch, pump(!) or low pressure.
Chris.
Re: Whirlpool AWM9100
Just to let you know Chris, fault on the above machine was low pressure, house is on private water supply so filters to machine valves clogged up, after cleaning machine worked fine.
Due to journey distance checked filter as well and found various obstructions. First time working on one of these models but once lower panel is removed lots of room to work.
Thanks once again for your input.
silverbroom
- You must be logged in to reply to this topic.