indersit wi 101

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indersit wi 101

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • June 18, 2008 at 6:08 pm #37474
    bluejack
    Participant

    [b]hi ive got a problem with an indersit wi 101 i dont think its heating up ive checked the heater and thermister with a meter they are ok . when i put programe 1 a 90 degree wash it fills up then empties again then the program timer goes around on its own ,any ideas thanks

    June 18, 2008 at 6:26 pm #255232
    smartin
    Participant

    Re: indersit wi 101

    when the timer starts clicking round the on light will be flashing on and off in quick succession count the number of flashes as that relates to a fault code

    smartin

    June 18, 2008 at 6:31 pm #255233
    bluejack
    Participant

    Re: indersit wi 101

    hi there are 7 flashes followed by a long pause then 7 flashes, thanks .

    June 18, 2008 at 6:40 pm #255234
    smartin
    Participant

    Re: indersit wi 101

    means heater relay stuck, i would double check heater and wires if all is ok then would be a pcb and eeprom obviously unplug before checking

    June 18, 2008 at 7:02 pm #255235
    bluejack
    Participant

    Re: indersit wi 101

    thanks,

    June 18, 2008 at 7:48 pm #255236
    gegsy
    Participant

    Re: indersit wi 101

    Moved to Trade section 😉

    Greg

    June 18, 2008 at 8:02 pm #255237
    johnnyj
    Participant

    Re: indersit wi 101

    Check for a dry joint on the module at the heater relay, this can cause this fault also.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.