Removing IWMS on Zanussi DE6965

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Removing IWMS on Zanussi DE6965

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 18, 2008 at 9:05 pm #37480
    BenChamp
    Participant

    I am trying to remove the IWMS on the Znaussi DE6965 but I can’t get it off. The bit that is eluding me is where the air vent is on the inside of the dishwasher which seems very firmly attached. I have already snapped a bit off in during my attempts. How can I get this off without totally destroying the air vent? TIA

    June 18, 2008 at 9:13 pm #255248
    Penguin45
    Participant

    Re: Removing IWMS on Zanussi DE6965

    It should just unscrew, anti-clockwise.

    Penguin45.

    June 18, 2008 at 9:46 pm #255249
    BenChamp
    Participant

    Re: Removing IWMS on Zanussi DE6965

    So obvious 😳 . Thanks :). I just need to work out how to take all the tubes off now……

    June 19, 2008 at 12:28 am #255250
    Penguin45
    Participant

    Re: Removing IWMS on Zanussi DE6965

    Make a diagram……… 😀

    Penguin45.

    June 20, 2008 at 8:05 pm #255251
    BenChamp
    Participant

    Re: Removing IWMS on Zanussi DE6965

    OK, I am still stuck trying to take this thing off. There are at least five pipes attached to the bottom of the IWMS but I can’t get to them to take them off. 🙁 How can I take the pipes off?

    June 20, 2008 at 8:12 pm #255252
    Penguin45
    Participant

    Re: Removing IWMS on Zanussi DE6965

    The front two have clips accessible from the front. The one from the valve is dealt with by unscrewing the valve mounting screws, the last two should just pull off. Don’t forget to undo the two screws at the bottom to allow it to move sideways.

    Stay safe, make sure it’s unplugged.

    Penguin45.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.