- This topic has 8 replies, 2 voices, and was last updated 17 years, 10 months ago by
.
-
Posts
-
I have the Turklish one Jim but I’ve not reworked it yet.
I doubt I’ll get a chance at it until David is back w/c 7th July, but it is on the list of things to do.
K.
Re: ISE 5 Mk 2 tech info
I have some nice Turkish stuff as well, a large wooden box of real Turkish Delight in four flavours. A present from my daughter for Fathers Day. 8)
Jim.
Re: ISE 5 Mk 2 tech info
This is more than a bump, its now a matter of urgency, 😉
Did an ISE 5 mk2 installation this afternoon. Machine filled for a few seconds then went dead except for display which continued to countdown.
Only a very (very) small amount of water and no motor action. Pressed start/cancel and machine flashed END and drained out, it did seem to stop flashing END much quicker than normal. Machine will spin perfectly. ❓No error messages displayed, not sure if one would have come up if I had left it long enough but as you can imagine it was embarrassing to say the least.
Anyone else had this problem?
Jim.
Re: ISE 5 Mk 2 tech info
Hi Jim,
If I got paid for every occasion I was told something was urgent, business critical, crucial or whatever else I’d be retired to the Cayman’s by now. 😉
I do however know that this is required.
I simply haven’t had the time to look at it yet let alone rewrite it all. I can let you have the Blue Peter DIY Turklish version if you like, it makes sense, sort of although a glass of your favourite tipple may help progress there.
I have that to do urgently, the trade guide for the WTA, the new fault code guide, the DW tech info and I’m sure a few more things besides as well as a day job which, ATM, is proving to be time consuming. That pressure I’m hoping will begin to ease at the end of the month a little and things will get back on track. But being forced back onto the phones and running the service company for a bit while a replacement is found is killing me on time for now as I’m not even treading water, I’m drowning in it.
I will however endeavour to get it done ASAP for you all, I can only apologise that circumstance has not allowed it to be done a LOT sooner as it should have been.
K.
Re: ISE 5 Mk 2 tech info
Not a problem K. I did add a 😉 in my post after all.
If I had possession of just a basic diagnostics test today I may have been able to sort this machine, I’m sure it must have been something quite simple, ( a bit like me in fact) 😆
Jim.
Re: ISE 5 Mk 2 tech info
I wasn’t having a go or making excuses Jim.
I’m bl00dy annoyed at myself for not having the time to do it. All these things should be done a lot faster than I seem currently able to do and, that annoys me greatly, as it pains me a lot to let you guys down in any way.
It doesn’t sit well with me and, if I came across defensive, that wasn’t the intent at all, I’m frustrated. I tend to pop off on one when the raw nerve is touched that I know is already a pain. 😉
Take no offence as I can assure you none was intended.
K.
Re: ISE 5 Mk 2 tech info
I’m a thick skinned Northener ( with a very soft centre) 😉
Thats why I know that when I ask these questions you won’t take umbrage with me. 8)
Jim.
- You must be logged in to reply to this topic.