- This topic has 2 replies, 2 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
I had the 3 lights indicating leak. Found the leak but now the machine will not respond to the programe or half load buttons and the only lights are the green power button and the load light none of the programme lights are on. I have held the Programme button down and all the lights come on but the machine works for about 30 secas and stops but all the lights stay on.Any help gratefully received
Re: Diplomat ADP 8352 Power but not working
im no expert but
unsure from that description pcb maybe faulty now
but when ever u get 3 light leak in base fairly common after that that display goes down due to low insulation on motor and wires causing u to get no display leds on left hand side cause by damp water in base wait and it will dry out up to week or try using hair dryer on very bottom for while or can jump start machine by turn on then of and then u get power to light for 3 secs pick any progranve other than rinse then turn back on again before light fades and heat from motor and element will help dry it out.
best option hair dryer throught black flap for while and wait
- You must be logged in to reply to this topic.