- This topic has 3 replies, 2 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
help ! we have a hoover nextra wash dryer If you put on spin it starts tumbling for a few seconds then start button and delay lights flash then stops altogether with the lights flashing on/off suspect power board !!!!!!!!!!! someone said heater’ thats ok! Also how to get top off miele slimline dishwasher thanks dal larry!!!!!!!!!!!
Re: hoover nextra hnwf 7137
Count the number of flashes. The number of flashes will give you the fault code. Look in known error codes, i’m sure its in there.
Re: hoover nextra hnwf 7137
thank u for reply re nextra on start and delay it flashes 11 times then cuts out stops ?????can u help ??? dal
Re: hoover nextra hnwf 7137
Hoover (Nextra series) washing machines
The ‘Start’ & ‘Pause’ LED’s will flash together to indicate the error code. You have to count the flashes within each 15 second period to get that error code. The start and the pause LED’s will flash together at 1Hz (i.e 1 flash per second) within that 15 second time frame, then will continue and show again within another 15secs and so on.
1 Flash = Interlock fault
2 Flashes = Fill time-out
3 flashes = Drain time-out
4 flashes = Overfill fault
5 flashes = NTC error
6 flashes = faulty control board
7 flashes = Motor jammed
8 flashes = Tacho fault
9 flashes = Motor triac on module board
10 flashes = Prog Selector or wiring fault
Nothing for 11 flashes. Perhaps it is something to do with the dryer circuit then?????Above faults are for Nextra washing machines.
- You must be logged in to reply to this topic.