Hoover FF – can I fit my own circuit board?

This topic has 1 reply, 2 voices, and was last updated 17 years, 10 months ago by walders.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
June 19, 2008 at 1:32 pm #37500

walders
Participant

Hi all,

I have a Hoover frdige-freezer (HCA 390 FFK) with a faulty circuit board (it keeps the compressor turned off; when the freezer is turned on, the compressor turns on, but then there’s a click in the control panel of the freezer, and it turns off).

My local handy man says he can’t help. Hoover will deliver a new circuit board for £42. They will send someone to fix it for an additional £100.

The 1st question I have is: is it possible/easy to fit the circuit baord myself? I don’t have a service manual for the thing, so I’d need some guidance in taking it apart.

The 2nd question is: should I just give up on this fridge-freezer and buy a new one? It’s about 6 years old….

Cheers,

Walders

June 19, 2008 at 11:36 pm #255330

helo_75
Participant

its as easy as unscrewing the fascia at the top of the machine, and fitting it… as long as your sure thats your problem?
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.