Bosch SGS59A22GB/17

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch SGS59A22GB/17

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 20, 2008 at 3:28 pm #37526
    DentedPorsche
    Participant

    Hiyas,
    Looking at one of these with a strange fault.
    Goes through the wash cycle ok, drains out, 40 minutes to go, starts filling for rinse, time drops to 5 mins, drains and ends the program.
    Hasn’t done any rinses at all.
    Anyone know what’s wrong with it?
    I appreciate any help or ideas given.

    Thanks
    Brian 😀

    June 20, 2008 at 6:18 pm #255435
    Penguin45
    Participant

    Re: Bosch SGS59A22GB/17

    Optical sensor playing up?

    Chris.

    June 21, 2008 at 4:12 pm #255436
    DentedPorsche
    Participant

    Re: Bosch SGS59A22GB/17

    Thanks for that Chris, it did cross my mind but missing out the rinses doesn’t seem to make any sense.


    Brian

    June 22, 2008 at 2:23 pm #255437
    gegsy
    Participant

    Re: Bosch SGS59A22GB/17

    Optical sensor faults are rare and usually down to crud on the faces which usually means a heater change.
    Also the sensor calibrates itself after every wash. If a calibration cannot be done, then a permanently stored programme is executed and an error is saved in the module.

    HTH

    Greg

    June 22, 2008 at 5:27 pm #255438
    DentedPorsche
    Participant

    Re: Bosch SGS59A22GB/17

    Thanks for that Greg.

    Brian

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.