Miele carbon brushes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele carbon brushes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 22, 2008 at 11:16 am #37555
    ChrisR
    Participant

    Hi.

    Left a message earlier re changing brushes on a Miele W504 but nobody has answered.

    Surely somebody out there knows the best way to tackle this job?.

    Thanks.

    Chris.

    June 22, 2008 at 1:31 pm #255576
    Seamy
    Participant

    Re: Miele carbon brushes

    Whats the problem, sorry can you remind us.
    Motor end plate comes off completely, this can all be done from front of machine by removing front cover of machine, remove screws from endplate & take end plate off motor to check brushes, if you need to take out motor all together side panels can be taken off machine too.

    June 23, 2008 at 11:23 am #255577
    ChrisR
    Participant

    Re: Miele carbon brushes

    Thanks Seamy.

    Just needed to know how to access motor.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.