siemens siwathern 7902 tumble dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens siwathern 7902 tumble dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 25, 2008 at 11:33 am #37631
    sandysuds
    Participant

    Hi
    Can any one help ,when you put this dryer on to tumble it only goes for sabout 3 minutes and then goes to zero(0) and bleeps 3 times intermittent
    Im baffled

    June 25, 2008 at 2:39 pm #255879
    A1engineer
    Participant

    Re: siemens siwathern 7902 tumble dryer

    have a look inside if it is the one fitted with a light look to see if the lens is missing, had a few of these with the lense missing condensation gets into board and machine does funny things.

    June 25, 2008 at 4:13 pm #255880
    eastlmark
    Moderator

    Re: siemens siwathern 7902 tumble dryer

    If its a condenser it could well be blocked. Check also it is heating as it may shut down if no heat rise detected.

    July 17, 2008 at 3:45 pm #255881
    sandysuds
    Participant

    Re: siemens siwathern 7902 tumble dryer

    Hi guys
    This dryer is still giving me a headache, when started laundry dry stays on then the dryer goes for about 3 mins and then goes to zero and bleeps , i have checked heating side ok. can anyone help

    July 17, 2008 at 6:50 pm #255882
    gegsy
    Participant

    Re: siemens siwathern 7902 tumble dryer

    Can you get model off the door frame. 🙂

    Greg

    July 17, 2008 at 7:24 pm #255883
    superfix
    Participant

    Re: siemens siwathern 7902 tumble dryer

    Are you testing it empty or with a load ?.

    If it’s a sensor dryer it WILL need a damp load for it to work.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.