- This topic has 6 replies, 3 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
Miele Oven Fault F5, Customer complaining either overheating and burning food or not heating at all.
any suggestions if its just the sensor or main pcb?
Steven
Re: Miele oven
Thanks Steve
Do you know if this part is a common fault or could there be a problem with the PCB?
The display shows a temperature of 15degs when it is much hotter.
Steven
Re: Miele oven B383/ib/kat
Replaced the oven sensor probe pt1000 recently, checked the corresponding temperture with my oven tester checked out ok.
Had a call from c/x today to say the f5 fault is showing again, it reached the set temperture of 160deg was showing on the screen. He did mention that he was cooking some oven chips and increased the pre set temp to 185 after this the display showed f5 fault which he cant clear.
Is this showing another problem or has the initial fault code got to be cleared?, can it be cancelled manually or does miele have to call with a lap top to do this?
Cheers
Re: Miele oven
Likely to have to clear fault codes in service mode.
Just check the cabling to p.c.b just in case theres a bad connection.Re: Miele oven
Likely to have to clear fault codes in service mode.
How do one access the service mode 😳
- You must be logged in to reply to this topic.