Miele spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele spin

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 5, 2008 at 7:23 am #37898
    pmb
    Participant

    Miele W842.
    No drum action, When its put on spin after a few seconds rinse light flashes
    then ends. Motor brushs O K.
    When i blow up pressure tube it does not click,
    The pressure switch seems to be part of module I havant come across this type before .
    Should this type click and is it a expensive part
    Any ideas

    July 5, 2008 at 8:50 am #257009
    philfish
    Participant

    Re: Miele spin

    Hate to say this but if the pressure switch is part of any board then you should never blow up them.My understanding of it is there is a little magnet type set up which passes through a resistior to measure the resistance to allow the board to know how much water is in it and they are very sensitive. so its looks like the board is shot and the board being miele will be very expensive! sorry.
    Rinses light is no pulse/signal from tacho within 1.5s so could be brushs,tacho,motor,wiring etc or of course the board hope this helps.

    July 7, 2008 at 1:09 pm #257010
    Seamy
    Participant

    Re: Miele spin

    Likely to be duff board if motor checks out ok.

    July 8, 2008 at 6:47 pm #257011
    msappliance
    Participant

    Re: Miele spin

    had alot of problems with loom breaking or wires going in to brushes

    July 11, 2008 at 5:40 pm #257012
    pmb
    Participant

    Re: Miele spin

    Thanks,
    Its a job i didnt wont,
    the price of the board is a silly price,
    So i have told them to get a new machine
    We charge a set labour charge and some jobs can be to much hassle

    July 11, 2008 at 8:07 pm #257013
    spanner51
    Participant

    Re: Miele spin

    pmb wrote:
    We charge a set labour charge and some jobs can be to much hassle

    Why not have a higher set labour charge for higher value machines. I always do, and no one has ever complained

    August 4, 2008 at 1:01 pm #257014
    trotter
    Participant

    Re: Miele spin

    Hey spanner51…….I love your way of thinking……only perhaps in reverse! I would happily work on an “Expensive” Miele than a “Value” indesit or servis.

    I guess it wouldn’t work though …. but a nice idea all the same 💡

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.