- This topic has 3 replies, 2 voices, and was last updated 17 years, 9 months ago by
.
-
Posts
-
Hi,
I have searched the forum but not found the exact problem I have.
My Bosch SGS43A22GB seems to be working fine except for getting stuck mid cycle alternately filling and emptying.
It fills OK, it drains fine, it is heating the water OK.
I have checked the connections to the control unit and looked for any dry joints on the control unit.
Any ideas as what the problem could be?
Re: Bosch SGS43A22GB getting stuck mid cycle
Most likely the usual suspects.
Crud in the rigid hose from the front of sump to metering unit on the lhs, crud in that unit and crud in the top left of the water matrix; the air break.
You will need to remove the l/h panel, the door outer panel and the panel below the door to gain access to all parts in question.Power off before attempting any of this :plug:
Greg
Re: Bosch SGS43A22GB getting stuck mid cycle
Many thanks for the advice.
Problem hopefully solved – crud in the sump outlet.
If anyone else has this problem, I managed to clear it using a bike pump, some garden watering system hose, insulation tape and the nozel from a tube of flexible sealant. Just connect it all up and blow air through the small outlet of the sump.
- You must be logged in to reply to this topic.