indesit w123ukbg

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › indesit w123ukbg

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 8, 2008 at 7:12 am #37947
    suedehead1
    Participant

    hi,
    i have a problem with this machine the belt keep coming of.
    when you put the belt on the motor deflects to such a degree where as soon as you turn the pulley the belt comes off. the bearings are ok.
    what appears to the problem is that the motor is only fixed by 2 bolts to a metal plate which is itself bolted to the outer tub spider.
    this metal plate doesnt appear to be strong enough.

    has anybody come across this problem before and does anybody have the part number for this plate.

    July 8, 2008 at 10:22 am #257217
    iadom
    Moderator

    Re: indesit w123ukbg

    Looking at the diagram it shows one short motor mounting bolt and one long one, however further information reveals that at some stage the welded motor mounting bracket has been removed from the outer tub, :rolls: The bracket is listed as a C00112822.

    Jim.

    July 8, 2008 at 6:47 pm #257218
    suedehead1
    Participant

    Re: indesit w123ukbg

    thanks very much for the reply i will give a new bracket a try.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.