Samsung SRL628EV

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung SRL628EV

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • July 12, 2008 at 8:55 am #38050
    hotpnt
    Participant

    HI, freezer still working, fridge not cooling, anything common on these to cause it?, (advised them in week to leave of 24hrs to clear any ice, no change, fan runs when 1st put on for 30secs only)

    thanks

    July 12, 2008 at 9:01 am #257520
    admin
    Keymaster

    Re: Samsung SRL628EV

    Hi

    You can check all the functions on this appliance by the microswitch on the main PCB.Probably a defrost problem in the fridge.easyily checked when on site.

    Bryan

    July 12, 2008 at 9:03 am #257521
    hotpnt
    Participant

    Re: Samsung SRL628EV

    Thanks, is there a test sequence then? cant see anything in the UKWG guide, do you remove the PCB to get to the switch,

    July 12, 2008 at 10:12 am #257522
    admin
    Keymaster

    Re: Samsung SRL628EV

    Hi

    1st press forced run
    2nd press forced defrost fridge
    3rd press full forced defrost

    The micro button is on top of the PCB you will see it once the cover is removed,put it into the full defrost mode to make sure the full system is working correctly,it’ll save a recall.

    Bryan

    July 12, 2008 at 3:13 pm #257523
    hotpnt
    Participant

    Re: Samsung SRL628EV

    so do these work similar to other frost free’s, like the hotpoints, where all the cooling is in the freezer, then the air blown into the fridge area, or is the fridge seperate, hence the need for a fridge defrost?

    July 12, 2008 at 4:13 pm #257524
    admin
    Keymaster

    Re: Samsung SRL628EV

    Hi

    This is a twin cooling system.

    Bryan

    July 12, 2008 at 9:09 pm #257525
    hotpnt
    Participant

    Re: Samsung SRL628EV

    ok, thanks, so am i looking for ice build up? is the back panel of the fridge removable then, with an accessable evaporator & fan?

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.