Hoover A3950

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover A3950

Viewing 13 posts - 1 through 13 (of 13 total)
  • Author
    Posts
  • July 16, 2008 at 8:07 pm #38141
    triphop27
    Participant

    Hi all
    Have been to see this machine today, when set to wash, water comes into pre wash, cycle then works for 10 mins then stops.
    When timer is moved on all works again through to spin.
    Heater and thermostats ok, could this be the timer?
    Customer very keen to repair as this is first problem in 15 years
    Thanks
    John

    July 16, 2008 at 8:10 pm #257853
    helo_75
    Participant

    hot valve?

    July 16, 2008 at 9:31 pm #257854
    iadom
    Moderator

    Re: Hoover A3950

    I have the data sheets if you need them.

    Jim.

    July 16, 2008 at 9:37 pm #257855
    triphop27
    Participant

    Re: Hoover A3950

    Fantastic, would be good to keep this machine going as looks almost new inside
    Thanks

    John

    July 16, 2008 at 9:52 pm #257856
    iadom
    Moderator

    Re: Hoover A3950

    I will fire up the scanner and e mail you the results.

    Jim.

    July 16, 2008 at 9:53 pm #257857
    helo_75
    Participant

    is it a logic? or earlier

    July 16, 2008 at 10:01 pm #257858
    iadom
    Moderator

    Re: Hoover A3950

    It is a logic with a Crouzet timer.

    You have mail. 🙂

    Jim.

    July 16, 2008 at 10:21 pm #257859
    leavemetogetonwithit
    Participant

    Re: Hoover A3950

    iadom wrote:a Crouzet timer.


    http://www.emwelec.co.uk

    July 16, 2008 at 10:25 pm #257860
    helo_75
    Participant

    omg an 022 timer still available

    http://www.emwelec.co.uk/html/Hoover-88 … timer.html

    July 16, 2008 at 10:28 pm #257861
    leavemetogetonwithit
    Participant

    Re: Hoover A3950

    And if it doesn’t fix the problem you send it back for a refund! Can’t lose.

    July 17, 2008 at 6:40 am #257862
    triphop27
    Participant

    Re: Hoover A3950

    timer code 88713194.

    Unfortunatley emw don’t have and cannot fix anymore.

    model ecologic 1000 deluxe

    Will change hot fill today see if that does it.

    Thanks
    John

    July 17, 2008 at 9:18 am #257863
    iadom
    Moderator

    Re: Hoover A3950

    Timer still listed as available new from Masterpart, 09052770.

    Jim.

    July 17, 2008 at 10:01 am #257864
    leavemetogetonwithit
    Participant

    Re: Hoover A3950

    I usually factor in the water and energy usage of these old bangers when deciding whether to recommend repair or replace. Also how much longer can it be before the backplate rots or the enamel on the drum is eaten through?
    Mike.

  • Author
    Posts
Viewing 13 posts - 1 through 13 (of 13 total)
  • You must be logged in to reply to this topic.