Hoover AI 130 1300 error code

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover AI 130 1300 error code

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 22, 2008 at 1:14 pm #38248
    daweorama
    Participant

    Can anyone help?

    My Hoover AI 130 machine has just started playing up. I get error 4 “Machine overfilling with water”. Machine stops at this point and i can then select a final spin and get washing out although its very wet. The machine in my view is also not draining correctly. Ive checked the filter all ok impeller can also move freely.

    any ideas?

    July 30, 2008 at 12:26 pm #258196
    boselecta
    Participant

    hi daweorama
    “error 4” says its a fault with the pressure switch/ inlet valve or pcb.

    Basically I think the sump is blocked and the pressure switch is not activating because of this causing the appliance to overfill.

    (“error 3” is a draining fault so i dont think its a blocked pump).
    If you are going to investigate yourself, switch the power off first, good luck.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.