Creda T532vw Reversing timer conversion

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Creda T532vw Reversing timer conversion

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • July 25, 2008 at 11:35 am #38303
    Simon46
    Participant

    Have received a new reversing timer with just two terminals on it. there is a wiring conversion. Is it a kit and does anybody have the info. Only went to fit a belt :rolls:

    thanks
    simon

    July 25, 2008 at 1:53 pm #258369
    Simon46
    Participant

    Re: Creda T532vw Reversing timer conversion

    Otherwise service manual has to be ordered.

    S.

    July 25, 2008 at 3:48 pm #258370
    iadom
    Moderator

    Re: Creda T532vw Reversing timer conversion

    What is the part number of the timer you have, it sounds like it may be a delay timer rather than a reversing one. The delay timer only has two contacts.

    Reversing timer is a 1702381, delay timer is 1702741.

    Don’t have a TDL manual but do have the VTD20 which uses the same reversing timer.

    Jim.

    July 29, 2008 at 5:45 am #258371
    Simon46
    Participant

    Re: Creda T532vw Reversing timer conversion

    1702381/C00099102 is the part number on the bag. Two terminals have the red motor wires soldered to them with possible space for two spades to fit on. two are empty. Connections show a note thet they are interchangable :con:

    S.

    July 29, 2008 at 9:07 am #258372
    iadom
    Moderator

    Re: Creda T532vw Reversing timer conversion

    So thats four terminals then?

    I will send you the stuff I have on the VTD20. It does list a few different timers.

    Jim.

    July 29, 2008 at 3:05 pm #258373
    Simon46
    Participant

    Re: Creda T532vw Reversing timer conversion

    Thanks Jim. New Timer is an invensys ZBN. I hope it doesnt go bang 😀

    S.

    July 29, 2008 at 3:36 pm #258374
    iadom
    Moderator

    Re: Creda T532vw Reversing timer conversion

    July 30, 2008 at 11:26 pm #258375
    Simon46
    Participant

    Re: Creda T532vw Reversing timer conversion

    😆
    it looks like how to configure the A and B contacts from the old to the new timer.

    S.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.