Diplomat ADP 8242 Help!!!!!!!!!!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Diplomat ADP 8242 Help!!!!!!!!!!

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 7, 2008 at 10:26 am #38588
    amliz
    Participant

    Hi
    Please could someone help me?
    The Program Selector Button has stopped working. All I get is two beeps and nothing else.
    I can`t seem to identify which part I need to buy, if any.
    Any help would be much appreciated.

    August 8, 2008 at 6:08 pm #259352
    karv
    Participant

    Re: Diplomat ADP 8242 Help!!!!!!!!!!

    hi ya im no expert but i belive that could be hard one many possible answers/causes may need engineer

    have u tryed hold ing button down for 10 secs to reset it and reset pc from test programme , info on this site about it i think.
    module could be faulty or blown
    low insulation from componets on these dishwasher can cause many problems
    does it work after u not used for while
    could be a leak thats cauing low insulation check base for leaks or signs of leak if so most liekly from white air break washers/o rings
    the anti noise fitter maybe starting to blow/ cylinder shape near where the mains wire connects to dishwasher can normal see my sight if it has.
    just some suggestions.
    ps does the door close ok? do ypou hear the click as u close it?

    August 9, 2008 at 8:22 am #259353
    amliz
    Participant

    Re: Diplomat ADP 8242 Help!!!!!!!!!!

    Hi,Thanks for replying.
    I found a reset code on this site involving pressing the program selector button four times very quickly to reset it.
    After a couple of goes it has worked and all seems to be working ok.
    No more washing up – Yippee!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.