Beko WMA 510 Auto

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA 510 Auto

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 13, 2008 at 1:23 pm #38725
    bassman
    Participant

    Can anyone help here I have a Beko wma 510 taking hours to wash I had a look at machine checked heater all ok but therminstor was only reading 6k with machine cold it seems a bit low , does anyone know what reading should be? I would have thought 14k. Or any ideas what might be wrong the machine fills and emptys ok so I assume it could be thermistor or PCB.
    Thanks

    August 13, 2008 at 1:39 pm #259784
    Del
    Moderator

    Re: Beko WMA 510 Auto

    Hi

    Actualy, 6K Ohms at room tempreture is about right. Have you tested the heater itself and its connections ?

    Sean

    August 13, 2008 at 2:41 pm #259785
    bassman
    Participant

    Re: Beko WMA 510 Auto

    Yes Heater is Ok Thanks

    August 13, 2008 at 4:22 pm #259786
    Galway
    Participant

    Re: Beko WMA 510 Auto

    rinse hold?

    August 13, 2008 at 5:19 pm #259787
    robbra
    Participant

    Re: Beko WMA 510 Auto

    Syphoning?????
    Rob

    August 14, 2008 at 7:54 am #259788
    bassman
    Participant

    Re: Beko WMA 510 Auto

    I checked for syphoning but not sure if this machine has a rinse hold button I will have to check.
    Thanks for the replys.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.