neff cooker hood

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › neff cooker hood

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 19, 2008 at 8:58 pm #38866
    admin
    Keymaster

    hello i have an error code on a neff cooker hood model D8980n1gb/03 (fd8003)
    the appliance works fine but when you switch it off it beeps 3 times and comes up with a 5 or maybe s in the display that wont go away unless you switch it off at the mains.

    any ideas please

    Thanks again

    Simon

    August 21, 2008 at 12:23 am #260207
    gegsy
    Participant

    Re: neff cooker hood

    Hi
    It Should only show two things in display when borking.
    1/ An “F” indicates a saturated grease filter
    Reset F by pressing the O button continously until an reaction follows.
    Possible reactions:
    audible signal
    display expires or shows “0”

    2/ A “C” is displayed and an audible signal is emitted.
    C indicates a saturated carbon filter, i.e. replace the carbon filter.
    C is displayed after 240 (+30) operating hours.
    Reset F by pressing the O button continously until an reaction follows.
    Possible reactions:
    audible signal
    display expires or shows “0”

    HTH

    Greg

    August 21, 2008 at 9:23 pm #260208
    admin
    Keymaster

    Re: neff cooker hood

    while working no codes apear, its when you turn the appliance off that the fault accurs, i have checked the filters and they are clear .

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.