Indesit WD12x Integrated Washer Dryer error code 13 flashes

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit WD12x Integrated Washer Dryer error code 13 flashes

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 20, 2008 at 11:13 am #38881
    mattpower
    Participant

    Hi

    My machine washes fine, but over the period of time ive had it the dryer has took longer to dry and reached the point now that it isnt drying and gives me this error code. Anyone know what 13 flashes mean?

    Thanks

    August 20, 2008 at 5:59 pm #260244
    helo_75
    Participant

    yep.. the dryers faulty

    take your pick.. blocked condenser.. thermal fuse… heater.. fan motor… all the above… the usual culprit is the ntc tbh, but you can take your pick from any of them.. best thing to do is systematically test each component with a multimeter, with the plug out

    August 20, 2008 at 9:14 pm #260245
    mattpower
    Participant

    Re: Indesit WD12x Integrated Washer Dryer error code 13 flas

    Ok

    Done some testing Fan is going, heater getting hot, water going inside. To me drying components working. Removed pump checked for blockages and nothing, retried and now getting 8 flashes. Pump doesnt seem to be removing the water even though it sounds like it is working. I get a rush of water noise when the pump stops.

    Took the pump off and removed the spindle magnet and it was all clogged up, removed it as best I could and refitted, but still get 8 flashes.

    Do I need a new pump?

    August 20, 2008 at 9:16 pm #260246
    helo_75
    Participant

    8 flashes is a heater relay fault

    thats normally a pcb problem.. not going well is it

    id let it dry out for a bit.. maybe somethings got damp?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.