Homark SE4400 Problem

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Homark SE4400 Problem

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 21, 2008 at 6:09 am #38909
    dfowler
    Participant

    This in-cupboard small dishwasher will not work after 10 years in the loft but only 3 months use from new in 1997. Moved house. Been renovating etc.

    Water will not go in from the hose at the dishwasher end. If filled with water manually it sprays and pumps out properly.

    Suggestions for cause and checks please. I note from a 1995 posting that spares are trickey and expensive for what is now an old machine so anything big and the dishwasher gets it!

    Is there a replacement of similar dimensions, cupboard max size 42w x 68h x 52d.

    Thanks Dick

    August 21, 2008 at 4:01 pm #260325
    cockney steve
    Participant

    Re: Homark SE4400 Problem

    The first thing (and probably wildly inaccurate!) that comes to mind, is perished rubber in the fill-valve and the solenoid is not strong enough to “unstick “it.

    unplug if removing panels!

    August 21, 2008 at 11:31 pm #260326
    Penguin45
    Participant

    Re: Homark SE4400 Problem

    Spares are officially obsolete. With the power off, check the resistance of the coil on the inlet valve – you should get approx 3.5kOhm with it split from the circuit. If it’s dead, a generic valve should fit – contact spares@ukwhitegoods.co.uk for supply.

    The machine was a unique product – there is no similar replacement.

    Penguin45.

    August 22, 2008 at 5:05 am #260327
    dfowler
    Participant

    Re: Homark SE4400 Problem

    Many thanks CS and Penguin, I will investigate as suggested (and without ‘doing a Homer’ – Simpson with live electrics).

    If I have to scrap it is there some bit of this site I can offer it on for free spares?

    Dick (originally from Huddersfield just to make this a Yorkie trio)

    August 29, 2008 at 2:13 pm #260328
    Dave_wattss_2000
    Participant

    Re: Homark SE4400 Problem

    Hi d,

    If you are going to scarp it please let me know. I need a wash pump for mine

    Thanks

    dave_watts_2000@yahoo.co.uk

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.