- This topic has 5 replies, 3 voices, and was last updated 17 years, 7 months ago by
.
-
Posts
-
LG WM1222OFD 7.5KG WASHING MACHINE
hi
Went to this one the other day and the machine was flashing up CE on the display ,
Which according to the book is motor over load fault ,When you put it on a wash or a spin progarme 20 secs in to this it flashes up CE ,
Its got the direct drive motor on the back , this dose not even attempt to move ?
The outlet drain hose etc, was badly blocked up so unblocked all this so it can empty water out properly,So me thinks change the stator motor …..pn/lge4417fa1994e ordered one up and fitted it
BUT ….. still comes up with CE fault code ….has any one else had this before ???
Is the front board at fault!, or both, did the blocked hose damage any of these ?? the sump ,pressure system are all clear,….
Any help on this will be much appreciated 😀Regards
Canufixit?mmmm??we will have to see 😕
Lucky GoldstarRe: LG WM1222OFD 7.5KG WASHING MACHINE
😕 well i dont feel so bad when no one eles has had this joy of the lg
machines 😕
canufixitRe: LG WM1222OFD 7.5KG WASHING MACHINE
Theres a senser on the bottom of stator windings (bal senser) I would be checking conections to this and that it is properly located.
wires commonly break on the pck connection
if theres no movement at all, its usually the pcb, not the stator, but that doesnt rule the stator outRe: LG WM1222OFD 7.5KG WASHING MACHINE
thanks pgs/hello 75
the new field did come with new senser,
wires commonly break on the pck connection ,i will take a closer look at this, but did look fine at the time.
me thinks pcb gone down,££££££££,or both,stator as well£££££££££££! 😥regards
canufixit
:rolls:
- You must be logged in to reply to this topic.